Anfrage stellen
Möchten Sie ein persönliches Gespräch mit unserem Geschäftsführer, um Ihr Projekt zu besprechen? Kein Problem! Bitte klicken Sie einfach auf den folgenden Button und reservieren einen Termin.
The ultra-low weight FS-1-25 offers inherent mechanical compliance, allowing high approach speeds without damaging fragile parts. The properties of the sensor make the FS-1-25 ideal for applications such as polishing, grinding, or joining where compensation of surface irregularities or tolerances is needed. It comes with versatile electronics, offering an analog output as well as digital communication and IOs. The standard force range is +/-25 N (other ranges upon request).
TECHNICAL SPECIFICATION | ||
---|---|---|
Dimensions | Diameter 52 mm, height 26 mm | |
Weight | 70 to 120 g | Depending on housing material |
Force range | +/- 25 N | Maximum and minimum force |
Resolution | 0.5 N | Smallest detectable output under consideration of noise |
Hysteresis | <2% F.S. | Maximum measured width of hysteresis |
Linearity error | <2% F.S. | Maximum difference between output and ideal linear curve (including Hysteresis & noise) |
Repeatability | 0.3 N | Sensor signal variation when moved to the same force-level |
Sensitivity | 0.2 V/N | Output change per N deformation |
Overload in compression | >200 N | Maximum compression force w/o damage |
Overload in tension | up to design | Maximum tension force w/o damage |
Digital communication | UART | Others on request |
Digital IOs | up to 8 | Upon definition |
Analog output | 0…10V or 4…20mA | Proportional to sensor signal |
Sampling frequency | ≤2 kHz* | Maximum refreshing rate of analog output |
Operating temperature | -55 to 80°C | Higher without electronic |
Supply voltage | 5V, 12V, 24 V or 9…36V | 5 V reduces analog output to 0…5 V |
Connection | M8 5 pins | may vary according to digital IOs |
Diameter: 52 mm
Hight: 33 mm
DELFA Systems GmbH Campus,
Buildung A1 1
66123 Saarbruecken
Subject to change. All information describes our products in general terms. They do not represent any quality or liability guarantee according to §443 BGB. The information does not justify any liability.
Specifications are subject to change without notice
Date: July 12, 2022
Möchten Sie ein persönliches Gespräch mit unserem Geschäftsführer, um Ihr Projekt zu besprechen? Kein Problem! Bitte klicken Sie einfach auf den folgenden Button und reservieren einen Termin.